the ball mill is the key equipment for crushing the material after it is crushed. Ball mills are widely used in cement, silicate products, new building materials, refractory materials, fertilizers, ferrous and non-ferrous metal beneficiation and glass ceramics and other production industries, dry or wet grinding of various ores and other grindable materials. The equipment has the characteristics of stable operation, reliable operation, large production capacity and long service life.

the ball mill is composed of main parts such as feeding part, discharging part, rotating part, transmission part (reducer, small transmission gear, motor, electric control). the hollow shaft is made of cast steel, the inner lining can be removed and replaced, the large rotary gear is processed by casting gear hobbing, and the cylinder is inlaid with a wear-resistant lining plate, which has good wear resistance. the machine runs smoothly and works reliably.


the main body of the ball mill includes a cylinder, which is inlaid with a lining made of wear-resistant materials, a bearing that carries the cylinder and maintains its rotation, and also has a driving part, such as a motor, and transmission gears, pulleys, V-belts, etc.

1. Cylinder: the cylinder is the main part of the ball mill. It is a circular device made of welded steel plates of a certain thickness. When working, it not only bears the static load of its own grinding medium, but also is affected by the alternating stress generated by the grinding medium impacting the rotation of the cylinder. Therefore, it must have sufficient strength and rigidity.

2. Bearing: the bearing is the supporting part of the ball mill, which carries the mass of the rotating part of the ball mill and the impact load of the grinding medium. Moreover, the rolling bearing is used instead of the sliding bearing, which has low running resistance and significant energy saving. It is also necessary to do a good job of lubrication and heat dissipation.

3. Transmission device: the ball mill is a heavy-duty, low-speed and constant-speed machine. Generally, the transmission device is divided into two forms: edge drive and center drive, including motor, reducer, drive shaft, edge drive gears and V-belts, etc.

4. Feeding and discharging device: the feeding and discharging device of the ball mill is mainly composed of an end cover with a hollow journal, a joint feeder, a fan-shaped liner and an inner sleeve of the journal.

ADVANTAGES of BALL MILL

1. Strong adaptability
the ball mill has strong adaptability, can grind most materials and mix them uniformly, and can adapt to the operation in different environments.

2. Meet different needs
It can operate continuously, and the production capacity can reach more than 200 tons per hour, which meets the needs of modern industrial large-scale production.

3. Strong sealing
the ball mill equipment has a good sealing device, strong sealing, and can be operated under negative pressure to prevent dust from flying.

4. the material has high wear resistance
the casting turning device is adopted, the hollow shaft is made of cast steel, the steel plate is planed, and the flanges at both ends of the cylinder are made of large CNC cylinder lathes. The special processing technology can fully meet the requirements of concentricity and has good wear resistance.

5. Low energy consumption
the ball mill adopts a wave-type annular lining plate, which increases the contact surface between the ball and the ore, strengthens the grinding effect, and has the ability to lift the ore, reducing energy consumption.

6. Long bearing life
the bearings used in the ball mill are not only advanced in material, but also refined in the manufacturing process, which increases the service life by about 15% compared with the traditional ball mill bearings.