Using advanced technologies such as magnetic levitation compressor technology, DC frequency conversion control technology, and oil-free lubrication, the energy efficiency ratio of the product has been greatly improved. the highest energy efficiency ratio of the unit under partial load is 26, and the highest comprehensive energy efficiency ratio can reach 11.98.
the outlet temperature of the oxidation direct cooling frequency conversion magnetic levitation centrifugal chiller is accurate to ±0.1°C, which improves the uniformity of the oxide film;
No need for plate heat exchanger, chilled water pump, chilled water tank, saving investment cost;
Low starting current, only 2A soft starting current for a single compressor, no soft starter required, no impact on the power grid;
the maglev unit has no oil circuit system, maintenance-free, and energy-saving operating costs;
the unit can realize continuous intelligent adjustment of 0%-100% load, and the control accuracy of outlet water temperature is ±0.1℃;
Magnetic suspension bearing makes the moving parts completely suspended, the compressor runs completely without friction, the structure vibration is close to 0, the running noise is low, and no expensive shock absorbing accessories are needed.
the unit adopts environmentally friendly refrigerant R134a, which has an ozone layer depletion value (ODP) of 0. It is a positive pressure refrigerant, which avoids the risk of air being mixed into the system.
Remote control and management through PC and remote client;
the power consumption of each ton of aluminum material is about 40 degrees, which is more than 40% energy-saving than the direct cooling unit.

 
Profile Oxidation Magnetic Suspension Centrifugal Refrigeration Unit