during laboratory work, deviations and errors in analytical results areUsually caused due to the poor purity of the acid. Commercially available ultrapure acidsAlways too expensive to meet the large demand for acids in routine analysis. Therefore, it is an economical and feasible way to purify and optimize the quality of the acid by an acid purifier.Our acid purifier can be used for the purification of laboratory such as HNO3, HCl, HF, alkali solution and organic solvent. the purified acid is as good as Merck's. in the later stage of the experiment, it can be matched with our Teflon reagent bottlesto collect high-purity acid.

Features of our PTFE Acid Purifier:

1. the sub-boiling distillation mode is adopted to keep the temperature of the liquid in the chamber lower than the boiling point temperature, evaporate and condense to prepare high-purity acid.

2. the acid is kept at the top to avoid cross-contamination from the source

3. Heating through the bottom silicone sheet, PID temperature control digital display, more user-friendly structure design, simple and convenient operation, can be placed in a fume hood to work and realize unattended

4. Pagoda-shaped condensation, no need for cooling water, faster cooling, efficient acid production

5. All parts are made of Teflon plastic to prevent potential problems of corrosion and secondary pollution

6. It can continuously prepare nitric acid, hydrochloric acid, hydrofluoric acid, alkaline solvent and organic solvent

7. Not afraid of drying, with overheating protection function

8. the acid purifier with a specification of 2000ml can extract about 900ml of high-purity acid within 12 hours

9. Extremely low operating power consumption, which is an economical and fast method for preparing high-purity acid