Please note

1. the power cord of the product should be plugged into a power outlet.

2. Please wear safety goggles and protective mask when working.

3. the workpiece must be placed on the working table when working.

4. the gap between the adjusting table and the sanding belt or sandpaper should be less than 3 mm.

5. Do not use this product in a wet environment. FEATURES All-steel construction, simple, sturdy and ultra-smooth All-steel frame welded at all seams, very strong, precise belt control for smooth running and very stable tracking, so it does not make a lot of noise.

6 Wheel Design, Reduced Vibration Speed control gives better control when doing detail work and reduces heat from heat treated blades, supplied with an adjustable inclinometer with medium grit belt and disc. the setup runs smoothly and tracks very consistently, every detail of the belt sander is designed to maximise performance, operability and accuracy Reliable belt sander designed for precise detail work for removing blanks, contours, grips and finish work, satin or mirror polishing Tracking adjustments to keep the belt running properly

the following points should reference:
1.According to different grinding types, user can choose from three different Grinding wheel.
First, you need to insert the movable rod of grinding wheel, hanging on the Belt and compressing the spring.
Second, you must pull the movable rod with maximum length.
Last, locking the handle.
2.User need to manually turn the belt a few laps, then the power can be Switched on. You can adjust the knob slightly for making the wheel not to Deviate.
3.Choosing the compatible line speed according to different grinding wheel. Sun Wheel is proposed in high speed(35-50Hz). Flat arc and arc ginding wheel with Medium low speed(25-42Hz).

4.Waring! Machine and inverter must be isolated while grinding.Try to keep the inverter clean to prevent metal particles from falling into and cause Trouble.

Specifications