CP2088 pressure sensor
Diffused silicon pressure transmitter digital display high temperature explosion-proof gauge pressure absolute pressure hydraulic pressure 2088 pressure sensor

Product model: CP2088 pressure sensor
Comprehensive accuracy: 0.1~0.5%
Measuring range: -0.1~100Mpa (can be customized)
Ambient temperature:-10~+125°C
Output signal: DC4~20mA+HART protocol
Product shell: cast aluminum alloy material
Protection level: IP67
Diaphragm material: 316L (default)
Electrical interface: M20*1.5, 1/2'NPT, G1/2'
CP2088 type
CP2088 high temperature type

Product selection
CP2088 series pressure/differential pressure transmitter adopts shell thread size M27x2, or direct outlet type. According to different applications on site, different types of sensors can be used, and a variety of circuit board types are available (analog board, digital board, intelligent board board, etc.). Because of its compact and flexible installation method, it has been widely used in various fields.

Illustrate
the CP2088 pressure transmitter is assembled with high-quality and high-precision imported sensitive components. It has a compact structure, light weight, and is easy to install and maintain. the zero point and range can be continuously adjusted externally, and the migration range is wide.
High-temperature products adopt a multi-chip heat sink structure, allowing the product to work stably for a long time at a high temperature of 315°C.



Wireless remote pressure sensor Battery powered digital display explosion-proof shock-proof 4-20mA wireless pressure transmitter

CPS801 wireless remote pressure transmitter
Product model:CPS801 wireless remote pressure transmitter
Measured medium: liquid, gas
Accuracy:0.2%F.S
Measurement range:-0.1MPa~100MPa can be customized
Overload pressure:150% F.S
Decimal places:0~3 can be set
Signal transmission:4G network communication
Explosion-proof grade:Exib llB T4 GB
Ambient temperature:-30~70°C
Ambient humidity:< 97%RH
Working power:3.6V 19000mAh lithium battery power supply (non-rechargeable)
3.7V 1000mAh rechargeable battery
Reporting period:1min~24 hours can be set

CPS801 wireless remote pressure transmitter
Wireless pressure transmitter is based on 4G wireless communication network to make pressure measurement, transmission, reporting as one of the low power consumption intelligent instrument. Integrated high sensitivity pressure detection element, high precision signal conditioning circuit, new microprocessor technology, ultra low power consumption battery life up to 1-5 years. Rich LCD display interface in one. Suitable for oil field, water conservancy, fire pipe network, water pipe network, urban heating pipe network and other smart city application scenarios. Periodically report pressure measurement value, battery power, signal quality and other data, and can timely alarm when the pressure exceeds the set range, early warning of trouble. and support the data access service of the third party platform.



CPS803 direct connection pressure transmitter

Pressure transmitter sensor digital explosion-proof capacitive 4-20mA high temperature resistant single crystal silicon pressure transmitter

CPS803 direct connection pressure transmitter
the CPS803 pressure transmitter is used to measure liquid, gas or vapor pressure and convert it to 4-20mA , d.c. Current (superimposed HART communication) or RS485 communication signal output; It can realize remote setting and monitoring through communication equipment.

the overall accuracy is 0.1FS%/5 years
Product shell: aluminum alloy material, exterior spray epoxy resin
Measurement range:-0.1~60Mpa, can be customized
Ambient temperature:-40~+85°C, -10~+60°C
Enclosure protection:IP67
Output signal:4-20mA analog output +HART communication
Diaphragm material:316L/ titanium /HC/ Tantalum/Hastelloy C/ Monel alloy
Bus standard:4~20mA HART

Direct connection pressure transmitter 5 models:
Economy type internal thread
Economy type external thread
Internal thread thread
External thread thread
316L



CPS813 Papermaking Pressure Transmitter
Flat membrane pressure transmitter water/oil/air pressure diffusion silicon shock-resistant digital display explosion-proof single flange liquid level sensor

CPS813 Papermaking Pressure Transmitter
CPS813 is a high-precision paper-making pressure transmitter with special process connections. the pressure-sensing unit is in the front and the diaphragm is flush with the inner wall of the pipe. It solves the problem of easy clogging of high-viscosity media and can be used in paper-making and other clogging-prone working conditions. Its function is to convert the detected pressure signal into 4-20mAd.c. Current (superimposed HART communication) or RS485 communication signal output: remote setting, monitoring and other functions can be realized through communication equipment.
Pressure transmitter parameter table
Product model:CPS813
Comprehensive accuracy: 0.2%
Measuring range: -0.1~10Mpa (can be customized)
Ambient temperature:-40~+80°C
Output signal: 4~20mA+HART protocol/PROFIEUS-PA/FF
Product shell: cast aluminum alloy material
Protection level: IP67
Diaphragm material: 316L/HC-276/tantalum/Monel/316L gold plating
Electrical interface: M20*1.5, 1/2'NPT
Pressure transmitter style:
50.5 chuck type pressure transmitter
Threaded flat membrane pressure transmitter
Threaded diaphragm pressure transmitter
Papermaking type pressure transmitter



Monocrystalline silicondifferential pressure transmitter,
Stainless steel differentialpressure transmitter,
the CPS843 differential pressure transmitter is used to measure liquids. Gas.Vapor differential pressure, flow, and convert it into 4-20mA d.c.Current(superposition HART communication) or RS485 communication signal output;Remote setting, monitoring and other functions can be achieved throughcommunication equipment.
Warranty???: 1 year
Place of Origin: Anhui, China
Customized support: OEM, ODM, OBM
Brand Name: Eagle eye instrument
Model Number:CP-35
Measuring medium:Gas, liquid and steam are common
Output signal: DC4~20mA+HART protocol
Range range: -0.1~60MPa(customizable)