GPS-18 Reverse Circulation Drilling Rigs
● It is mechanically driven, hydraulically operated, easy handling, maintenance, and of dependable quality.
● There are six speed choices of the turntable to meet excavating requests in different layers, which promotes the drilling speed
● A shift lever is mounted to the turntable to gear the drilling bars, which is easy handling, safe, and considerate manual power saving.
● The turntable and the hydraulic device together work to move the drilling tools of large diameters (≤1.8m) away from the piling.
● Hoisting and downing of the drilling mast is driven safely and fast by the hydraulic cylinders.
● Guidance slot mounted to the taller boring tower to guarantee the verticality of the piling, and reduce the possibility of oversize of the taller boring; a device mounted for removing the drilling pile away from the taller boring.
● The pulley block move transversally by force of the cylinder, the winches leveled directly to the piling. Self-service operation of the drilling mast during the hoisting and downing of the drilling tools.
● Easy handling and reliable operation of the winches with epicyclic gear system.
● A round drilling bar (L=3500mm) to shorten the ancillary working hours.
● Reverse cycling sand pumps mounted to meet different layers, and adaptable to normal cycling when needed. Applicable to air-lifting reverse drilling tools and can drill deep hole.
Specifications
Rated diameter of hole
m
1.8
Drilling depth
m
120
Rated torque of rotary table
kNm
26
Speed of rotary table
rpm
14,19,24,33,44,60
Drilling tools
Ф180 x 12 (standard)
Ф168 x 11, Ф180 x 16 (option)
Main winch lifting force (single line)
kN
30
Auxiliary winch lifting force (single line)
kN
25
Rated load of drilling mast
kN
180
Height of drilling mast
m
9
Power
kw
37
Overall dimension
(L x W x H)
m
10.03 x 2.2 x 2.5
Weight of the whole machine(standard)
t
12
Weight of base machine
t
8