Specifications The water filter station consists of booster pump,pretreatment units(including quartz sand filter,active carbon filter and micropore-filter),high pressure pump,reverse osmosis(RO) membrane,conductivity meter,UV sterilizer and controls.All these units are mounted on the stainless steel frames for water filtration.The station is used to remove residual suspended solids and organic matter from water and kill bacteria and virus.The portable water is filtered and perfected in this way.The station is unattended and controlled by PLC.It automatically monitors high volume water filtration and long service life. Main technical data Model RO-500 RO-800 RO-1100 RO-1600 RO-3000 Rated inlet water flowrate(M3/H) ≥1.5 ≥2.0 ≥2.5 ≥3.0 ≥5.0 Rated inlet water pressure 0.18Mpa-0.6Mpa Rated pressure 1.2Mpa-1.4Mpa Rated power(kw) 1.6 2.8 3.8 4.6 6.5 Rated water output 500L/H 800L/H 1100L/H 1600L/H 3000L/H Rated water recovery 35% 55% 70% 35% 55% Desalination rate 98% Raw water conductivity <200US/CM Filtered water conductivity <10US/CM