These nozzles operate by oscillating an impeller within a chamber at high frequency, shattering the water as it is forced out an.008 orifice. Cooling nozzles: High pressure nozzles designed to produce a 3 to 10 * size water droplets. Applications for these nozzles include greenhouses, outdoor cooling, humidity control, odor neutralization, dust suppression, animal cooling, and anywhere a fine, pure water droplet is required. These nozzles are also used on our fan rings for aspirated fog applications. We have these nozzles fabricated in brass with a stainless steel impeller chamber and in solid 316 stainless steel. Each nozzle is mated to an anti-drip valve(checkvalve) that snaps each nozzle off @ 65psi. This feature reduces nozzle maintenance and will defeat the drip that can occur when the system is shut off or staged. The nozzle and the anti-drip valve are available separately, the check ball and spring are also available to rebuild the valve body. * = 1 micron or 1/1000 of a millimeter Fine atomization High energy efficiency One-piece construction No whirl vanes or internal parts Highly efficient laminar jet impinges on target pin generating fine fog Male connection Produces high percentage of droplets in the 25-40 micron range Fine atomization nozzle The produces fine atomization making it ideal for dust control and odor suppression. We are especially useful in controlling dust at pulp piles and hoppers of pulp mills. Its produce a finely atomized mist at low flow rates making them a good economical choice for injecting deodorants in open tower mist reactors.