Anping Yaohua Wire Mesh Weaving Factory produces quality manganese steel wire mesh screen for minery use. We also produce wire mesh screen for mine sieving in fine carbon steel, A3 high-carbon steel, T7A-T8A, stainless steel 1Cr18Ni19 or 2Cr18Ni9. Advantages of Manganese Steel Wire Mesh Screen for Mine Use: Wire rod used to produce mineral screen wire mesh must go through several important procedure: heating, punching, tempering and so on. These working procedures guarantee that the point of punching has no crystal fission. Otherwise the work life of the wire mesh screen may be dramatically reduced. Most importantly, this defects may bring problems when applied to use. Manganese Steel (65Mn) offers excellent wear-resisting, and for this propery, manganese steel is adopted into the production of wire mesh screen for minery use. One thing should be noted is that under the condition of low friction, manganese steel is not wear-resisting. Weaving Structure of Manganese Steel Wire Mesh Screen for Mine Use: We can produce a wide range of wire mesh screen in different wire materials with varied weaving patterns. Typical weaving patterns include long strip hole weaving, flat strip weaving, etc. We can also do custom designs. The weaving structure of inlaying form has several advantages. First, the intersect point of warp and weft is not projeccting; secondly, the mesh hole of the screen is accurate and fixed firmly. Compared with weaving structure of wave form of same material and size, the work life of the inlaying form wire mesh screen is increased greatly, also the firmness and the precision of the hole through work is strengthened.