Workable Model This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by: - Volkswagen - Audi - Skoda - Seat Reference Data 1. This cable can not work if your car uses a protocol/bussystem like VPW, PWM or CAN-bus. 2. Terminal K = Bus of communication 3. Terminal L = Ignition for waking up car computing system (ECU: Engine Control Unit) 4. Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW 5. This K/L Diagnostic interface & cables work on ISO/KWP (Key Word Protocol) launched after 1996 only 6. Supported also ISO9141 protocol 7. The Cables may work with some versions of the Carsoft, but carsoft used a lot of different interfaces during the different versions and also had some custom interfaces. VAG-COM shareware download: /vag-com/download/ Applications of the VAG-COM: /vag-com/download/ Read & erase error code, log data e.g., speed, gasoline-consume, engine-rotating (RPM: Rotation Per Minutes)