XP4-4 one to four automatism machine of manufacture bottle, the machine is the most advanced product in China and can replace imported product. As a result of lots of experiments, the machine was designed sucessfully by the engineers of the company with the cooperation of experts and professors of university. 1.The available rate of the machine can be more than 25 day per month. 2.Eligibility rate of products is more than 99.5%. 3.For less than 600ml water bottle, output more 1800 piece per hour. 4.For less than 600ml carbonic acid drink bottle, output quantity more than 1450 piece per hour. 5.For less than 1250ml carbonic acid drink bottle, output quantity more than 1300 piece per hour. High first-try successful rate The machine run automatically by fixed program to avoid man-made wrongdoings. To keep temperature balance both inside and outside of rough bottle by adjusting temperature advice and air shower advice, with 99.5% eligibility rate of products by 25kg pressure blowing air. Good quality Molding bottle by high pressure and low temperature, increasing intensity and transparence of bottle, blowing process divide into two grade to avoid inside wall of rough bottle touch pole when rough bottle is drew or extended, special for big, thick wall; small diameter of bottle. Low request of rough bottle The temperature of rough bottle is quite low after heat, which makes bend small and keeps bottom of bottle in center. Sanitation The hand of operator do not touch the gob of bottle, and control effectively separate out of acetaldehyde due to short heating period and low heat temperature. Safety Automation production avoids the accident of hand injury by 1200-2000CS/N, every mechanism action has safety lock advice each other. The whole machine comebacks into 1- 4.5mm safety condition when wall thickness of bottle appears abnormality. Credibility For the whole machine, electric; drive and gas power spare parts all use products of Germany, Britain and Japan. Numerical to control automatism lubricate system keeps mechanism running properly for long time. Easy operation Whole blowing bottle process can be finished by one operator to insert bottle rough who does not need special skill after set parameter of the machine. Low cost The machine can reduce raw materials 5-10% than other normal machine to produce same intensity bottle. XP4-4 Automatic 4 Cavity Blow-moulding Machine Technique Parameter Project Name Specification or Parameter Productivity 1200-2000pcs/n Wall thickness of preform 1-4.5mm Height of preform 50-200mm Diameter of preform 35-100mm Height of product 80-330mm Capacity of product 0.1-1.5L Working pressure 6-10Bar Primary blowing pressure 0-8Bar Secondary blowing pressure 10-25Bar Installed capacity 41KW Actual operating power 20KW Thermal control 5Zone8Section Locking strength 30T Outer dimension of machine 3m?1.7m?2.05m(L?W?H) Weight of machine 3T