Base on German machinery and Italian machinery ect. Used in foodstuff and pharmaceutical Which function is up to the state-of-the-art. It is used for pharmacy, foodstuff, medical apparatus, electrical enterprise; suitable for aluminum-aluminum-foil,paper-plastic composite sealing packing capsule,tablet, big honeyed pill, chocolate,injector, transfusion tube, pinhead, elctrical unit etc. Main characteristics as follows: 1. the cylinder increase the checking board automatically for year of the distortion of bubble caused by the radiation on machine stopping, and which relaesse the pressure at the same time to lengthen the life of machine. 2.the forming station, heating-sealing station, pressing, cutting all are modularized. Every station can be adjusted freely by hand wheel and e indicated by index and scale to improve the effciency of commissioning of machine and save packing material and make commissioning more scientific. 3.adjustng the assembly of plane cam and roads, in adjusting the length of drawing freely to make the machine apply all sizes of plates by adjusting the handle of rod. 4. the electrical-photo system: equipping with the electrical-photo system if the customers have the special demand, to fit the position of photo concurrent. 5. the separation of machine: the machine can be despatched into several subsections to make it easier to carry it into the elevator of 1.8m. 6. automatic ejector: in special requirement, which can automatic ejected unqualified blister in processing. 7. multifuctional assembly: increasing or decreasing from one to two mechanisms to aluminum plastic, aluminum aluminum, aluminum plastic aluminum packing, which reduces the initial investment and upgrade the machine according to the customers?demand to make the machine effective. 8. the friendly design: compared with all kinds of machines locally(the drawing mechanism and the adjusting mechanisms of all stations placed separately in the front of machine and back of the machine), we Installed all kinds of adjusting mechanism are installed in the front of machine, so the machine is more fridndly and reasonable. 9. intelligence and information management: adopting PLC, modularization, intelligence management and controlled by man-machine interface in the traditional pivotal electrical unit to improve the class of product, and enlarge the information memory. Punch frequency: 20-45 times/min Productivity: 72,000-236,000 pieces/min Max. forming area: 160*240mm Max. forming depth: 26mm Travel adjusting range: 30-120 Size of standard plate: 80*57mm Width and thickness of PVC and PTP: PVC 250*0.05-0.45mm, PTP250*0.02-0.03mm Power supply: 380V 50HZ Power: main motor 1.5KW, the hot-sealing unit and the others 4.0KW Capacity of air compressor: ≥0.2m3/min Cooling of mold: 60L/H tap water or cycling water, 60L/H Overall size: 3650*650*1750mm Weigth: 1500kg