> PET Series >> HI-P100" src="/co/n/nbhisson/img/oimg_GC00355723_CA00355794.jpg" /co/n/nbhisson/img/oimg_GC00355723_CA00355794.jpg, 560);" border=0 name=pro_img>
Hisson pet series is special designed for the point of PET preform, because in the production course of the pet, thick walled preforms need a long holding time during which shrinking due to cooling is compensated for. Especially in moulding 5-gallon bottle preforms, the holding time could be as long as half the cycle time. so, our pet series could meet the clients demands extremity.
Double crocks balance ejector system, multilevel pressure and speed ejector adjust, pressure adjust set, high speed close mold, low pressure protect, multi-quake ejector , hydraulic pressure and electron safe sets, lubrication system, oil-pressure scale control, computer control, mold remember system. Our company is able to replace multi-capacity molding computer of standard sets?control part to program control or relay figure control.
Machinery quakeproof horse, manipulator, hydraulic pressure socket, air ejector, dried feed gate, automatic feed machine, magnetic horse, hydraulic safe sets, cool machine, temperature control machine, automatic color gage, oil-strainer.
There are two model injection molding machine, A model and B model: A model is general model, B model is special design for PET perform, which has the character of high injection speed, huge injection weight and short cycle time.
Item
Unit
HI-P100
General type
PET type
Injection unit
Screw diameter
mm
35
38
Injection capacity(theoretical)
cm3
160
190
Injection weight
g
144
168
Injection rate
g/s
90
100
Plasticizing capacity
g/s
14
18
Injection pressure
mpa
170
144
Screw speed
rpm
220
Clamping unit
Clamp force
kn
1000
Open stoke
mm
305
Space between tie-bars
m/min
355*315
Max.mould height
mm
320
Min.mould height
mm
150
Ejector stroke
mm
70
Ejector force
kN
27
Others
Max.pump pressure
mpa
16
Pump motor power
kw
11
Heater power
kw
63
Machine dimensions(LxWxH)
m
3.58*1.33*1.65
Weight
t
2.7
Note:
.Date are based on the theoretical calculation under 50Hz operation, the actual shot weigh will change according to material and mould.
..All the parameter for you reference only, We take the order with special requirement.
..This parameter for you reference only! we reserve the right to change specification without prior notice!
> PET Series >> HI-P100" name=title>
