Fd-ly1001 universal solar-energy charger for mobile telephone 20pcs/ctn 60*34*45 3k ICQ:166438418 MSN:wangxiangqi(at)hotmail.com Universal Solar-Energy Charger for Mobil Telephone I.Preface:This Charger consists 0f three main sections:solar energy photocell,battery and intelligent controler.It is used to charge all kinds of mobile telephones. It can make direct charging under sunshine or charge with discharging from the built-in battery in any places with weak sunshine or without sunshine.It is a good standby power source for your mobile telephone when you are in travel,on board of ships or airpIanes,or in fieldwork. II.Specifications:Peak Power supplied by photocell:1.45 W;Operating Voltage:4.8V (max.);Charging Current:300mA(max.);Battery Capacity:1000mAh;Output Voltage:5.2 V;Charging Current:400mA(max.);Dimension:116 x 65 x 18 rnm;Weight:100g III.Function of Output Socket: As shown in the Fig.: IV.Explanation of Attached Figure 1.LED light 2.Socket for Direct Charge from Photocell (it also serves as socket for direct charge of built-in battery from external DC power source). 3.Indicator light of Battery and its Saturation. 4.Output Socket for Charge from Battery. 5.Indicator light of Battery operation. 6.Switch of Battery ON/OFF. V.Important ! 1.Never use this Charger in spots near flame. 2.The built-in battery,after fully charged,is used for emergency charging without sunshine during tour,travel on business or fieldwork. 3.Dont let this Charger fall into water.It is necessary to avoid making the builtin battery or electrical components wet. 4.Dont let any metal conductor to make the pole+and pole-for battery output circuitshort. 5.Dont dismantle this Charger or its internal components. 6.Please read this Users Instructions carefully before using this Charger.Improper operation may cause damage of built-in battery and/or electrical componentsor reduce battery capacity. 7.The built-in battery of this Charger is fully charged to saturated capacity before delivery from our Factory. The capacity may become Iower after long time of storage.Remaining capacity after 25 days of storage at 25C>=900mAh.At ordinary times,it iS advisable to place the Charger in spot where sunshine or strong scattered light can be on the photocell.In this way,the built-in battery can be charged frequently so that it can be ready for emergency charging at all time.A DC charger is provided to this Charger for charging built-in battery when necessary.Simply connect the DC Charger to an AC power supply of 110V-240V and connect its DC output to this Charger through the socket for direct charge from photocell. In this way,the built-in battery will be charged quickly. ICQ:166438418 MSN:wangxiangqi(at)hotmail.com