While doing integration of Audio Video Equipments / Projection Screen / Projector Lift and Drapes, controlled with Touch Panel (like AMX and Crestron or any other high end RF Remote Control System) in Board Rooms and Auditoriums we require some interface to control movement of Projection Screen, Lift and Drapes which is connected with Processor of touch panel. Or even Complete Rack in which all these equipments are mounted. Introducing you here with Timer Controlled Dual Function Screen Interface Model SI 4004. Which can control movement of Motorized Projection Screen, Projector Lift, Drapes and even complete Equipment Rack Power. Key Features ?Ideal to control motorized Projection Screen / Projector Lift / Drapes and Equipment Rack (AC 220 V operated). ?Timer Controlled ACTION : Cut off supply to Screen / Lift and Drapes automatically after 1.5 minutes. ?Can be used to 揙N?揙FF?Complete rack in which equipments are installed. ?Manually Controlled: Can be used to control movement of Screen / Lift and drapes manually (without touch panel) with three individual switch provided on front panel. as individually ?Blinking LED provided on front Panel to show the active function Applications ?Institutional Organizations ?Auditoriums ?Home Theaters ?Board Rooms ?Conference Halls Technical Specifications IN PUT Connectors FOR SCREEN: Individual 2 Pin Captive Screw terminals BlockFor UP & DN Movement FOR LIFT : Individual 2 Pin Captive Screw Terminals BlockFor UP & DN Movement FOR DRAPES: Individual 2 Pin Captive Screw Terminals BlockFor UP & DN Movement FOR RACK: One 3 Pin Captive Screw Terminal Block for Ground; Neutral & Phase connections OUT PUT Connectors FOR SCREEN: (7Amp. Relay)Three Pin Captive Screw Terminals Block FOR LIFT: (7Amp. Relay)Three Pin Captive Screw Terminals Block FOR DRAPES: (7Amp. Relay)Three Pin Captive Screw Terminals Block FOR RACK: (30Amp. Relay)Three Pin Captive Screw Terminals Block Operating Voltage For all Sources 220 V AC / 50 Hz. Total Load 2 Kva