Technical data Temperature -268-315 Pressure 210Bar PH rang 0-14 Common standard pls-200 1mm*30m 3mm*30m 1/8"*15ft 6mm*30m 1/4"*15ft 9mm*30m 3/8"*15ft 12mm*30m 1/2"*15ft 16mm*30m 5/8"*15ft 19mm*30m 3/4"*15ft 25mm*30m 1"*15ft Pearls 200 is adopted the micro-fibrillated structure 100% PTFE The micro-fibrillated structure tums ordinary PTFE into a dimensionally strong, creep resistant gasket material. It is soft and pliable to conform to worn or uneven flange surface and effect a tight seal. Yet it is resistant to cold flow and creep for long reliable life. The tape is with adhesive back for ease of installation at plant or scene. It can use at steam contain, flange, man-hole, glass joint, ceramic joint, heat transfer, water system, hydraulic pressure, gas system, pump or compression machine flange etc. Typical PLS-200 Joint sealant property Tensile strength Psig (Kpa) (ASTM f-152) 2.000(13.790) Compressibility %(ASTM f-36) 55-80 Leakage rate (ml/min) (ASTM F-37-8) 0.13 Variation of compressibility %(ASTMF-38) 40