The rack mount is a communication-level product specially designed and developed as the supportive equipment for communication optical network projects. It can be used in the working environment with high reliability, high capacity, high integration and high performance and features its stable performance, large power-supplying capacity, easy operation and convenient maintenance and so on. Before use, users shall read this User抯 Manual thoroughly and operate the rack mount as per the installation procedures so as to avoid the damage to the machine. APT-RACK-16 Media Converter Rack Mount:1unit Power cord (for power of 220V) or power connector (for power of -48V):2pieces Front baffle:16 pieces User抯 Manual: 1 copy APT-RACK-16Rack mount is the highly compositive central equipment for optical fiber transceiver. One rack can centralized encase 16 number of 100M or 10/100M multi-module or single-module fiber optic media converter,and centralized power supply. The design reduces the wiring and simplifies the structure, also convenient for management and maintenance . The APT-RACK-16 rack mount is compatible with heat insert and pull out ,optional single power module and dual power module. Two power module should be power supply at the same time with adopt dual power module.which can reduce the load of each power module.When one channel has fault, the other one can supply the power independently to make the media converter抯 working can抰 be interrupted. To maintenance and replacement the power module,you shouldn抰 pull out the fiber optic media converter ,and shouldn抰 take down the rack mount,only need to pull out the blooey power module to repair or updating,make the maintenance convenience and shortcut.afford high dependability for network system. High efficiency, easy operation, easy maintenance and economic ,applied to optical fiber hub resolve project. Technical parameters 1.Inserting grooves：16 2.Power input：AC 100-250V，50-60HZ 3.Dc output：DC+5V 4.Ripple：≤20mm 5.Noise：≤50mm 6.Power protection：over-voltage protection，over-current protection 7.Working temperature：0~50℃ 8.Storage temperature：-20~65℃ 9.Relative humidity：5%~95%(noncondensing) 10.Outer dimensions：485*245*90mm(L*W*H),19 inches 2U high