Dual-fiber dual-direction fiber optic media converter be used to Ethernet抯 electricity signal switch to photosignal抯 transmitter.Its feature is the media converter抯 RJ-45 interface can auto-identify with couple equipment port speed and pass autoconditioning working frequency to match with couple equipment port,the speed can adjust 10M 100M and 1000M.Due to built-in power independent optical port and working mode, can improve the stability and capability in working. APT-1124M11OC is a self-adapt gigabit multimode fiber optic media converterand the transmit photosignal wavelength is 850nm, have one RJ-45 interface and one SC single-fiber interface,separate used to connecting twisted-pair and fiber.Single fiber media converter have 6 LED indicator: POWER,SPDFX1000,SPDTX1000,FX Link/Act,TX Link/Act,FDX。 Technical parameter 1.According with IEEE802.3ab/z,IEEE802.3u,IEEE802.3x,IEEE802.1q,10Base- T,100B ASE-TX,1000BASE-TX,1000Base-SX,1000Base-LX standard. 2.Support TCP/IP,PPPOE,DHCP,ICMP,NAT protocol. 3.Flow control:Full-duplex adopt IEEE802.3X,half-duplex adopt Backpressure standard. 4.Eletricity port support auto-negotiation function,autoconditioning transmit mode and transmit speed. 5.Port support Auto-MDI/MDIX automatic reverse. 6.Support storage transmit mode,cache capability is 256K. 7.Support electricity port 1000M mode and self-adapt mode抯 switch. 8.Afford the state indicator, external power(output 5V~50HZ 1A). 9.Interface:electric port:RJ-45 fiber port:SC 10.Twisted-pair:Cat.5 Cat.6 11.Multimode fiber: 50/125,62.5/125祄 12.Working temperature: 0 ~ 50℃ 13.Storage temperature: -20~ 70℃ 14.Humidity: 5%~ 90%(noncondensing) 15.Size: 26*70*94mm(H*W*L) Specification Connect type:SC/FC/ST Fiber type:multimode Wavelength:850nm Typical distance:500meter Min TX PWR: -12.0dBm Max TX PWR : -6.0dBm Sensitivity: < -16dBm Link Budget: 4.0dBm