Single-fiber dual-direction fiber optic media converter be used Ethernet抯 electric signal to transmit photosignal 憇 photoelectricity signal transceiver,the feature is adopt one fiber cable can receive and transmit photosignal in-phase,enhance one double transmit energy than existing optical fiber ,economized fiber cable抯 source. APT-103WS36OC is a self-adapted single-fiber dual-direction fiber optic media convertr with 10/100M. Due to single-fiber dual-direction media converter抯 transmit photosignal transmit wavelength and receive wavelength are difference ,than must use by gemination. Namely is one TX and one RX ,don抰 be used wrong,otherwise can抰 work up to snuff. APT-103WS36OC singlemode single-fiber抯 transmit photosignal is wavelength 1550nm, receive photosignal is wavelength 1310nm;sing-fiber dual-direction media converter have one RJ-45 interface and one SC single-fiber interface,separate for use to connecting twisted-pair and fiber.Single-fiber media converter have 6 LED indicator:POWER,TX100,FX100,FX Link/ACT, TX Link/ACT,FDX. Technical paramter 1.Accord with IEEE802.3 IEEE802.3u IEEE802.3x IEEE802.1q 100Base-T,100Base-TX, 100Base-FX standard. 2.Support TCP/IP PPPOE DHCP ICMP NAT protocol 3.Flow control mode :full duplex adopt IEEE802.3X,half duplex adopt Backpressure抯 standard. 4.Electricity port support auto-negotiation function,autoregulation transmit mode and transmit speed. 5.Prot supply Auto-MDI/MDIX automatic reverse. 6.Support storage transmit mode 7.Support electricity port抯 10M 100M mode or self-adapt mode抯 switch. 8.Afford of state indicator,external power(output 5V-50HZ 1A) 9.Interface:electric port RJ-45 fiber port:SC 10.Twisted-pair: CAT.5 CAT.6 11.Singlemode fiber: 8/125,8.3/125, 9/125祄 12.working temperature: 0~50℃ 13.Storage temperature:-20~70℃ 14.Humidity: 5% ~ 90%(noncondensing) 15.Size: 26*70*94mm(H*W*L) Specification Connect type: SC Fiber type: singlemode Wavelengh: 1310/1550nm Typical distance: 60KM Min TX PWR: -5.0dBm Max TX PWR:0.0dbm Sensitivity:<-38dbm Link budget:33.0dbm