Dual-fiber dual-direction fiber optic media converter抯 module be used to Ethernet抯 electricity signal抯 transmit to photosignal抯 photoelectricity signal transceiver.The feature is use one pair optical fiber to transmit and receiver photosignal抯 in-phase.Due to signal use optic pulse抯 form in fiber optic transmit signal ,so relative to copper lead have more excellence:security,dependability,transmit speed,transmit distance are adapt LAN ,MAN,adopt modularization design convenient for media converter rack mount to collect manage. APT-103S34CC is 10/100M self-adapt dual-fiber dual-direction fiber optic media converter module and.According to IEEE802.3,IEEE802.3u,10BaseTX,100Base-FX standard . APT-103S34CC is a singlemode 100M dual-fiber media converter module.Dual-fiber dual-direction media converter have one RJ-45 interface and one SC single-fiber interface,separate for twisted-pair and fiber to connecting.Single-fiber media converter have 6 LED indicator: POWER,TX100,FX100,FX Link/ACT,TX Link/ACT,FDX。 Technical parameter 1.According with IEEE802.3 IEEE802.3u IEEE802.3X IEEE802.1Q 100Base-TX 100Base-TX 100Base-FX standard. 2.Afford TCP/IP,PPPOE,DHCP,ICMP,NAT protocol. 3.Flow control:full-duplex adopt IEEE802.3x,half-duplex adopt Backpressure standard. 4.Electric port support auto-negotiation function,autoconditioning transmit mode and transmit speed. 5.Port supply Auto-MDI/MDIX automatic reverse. 6.Support storage transmit mode. 7.Support electric port抯 10M 100M mode and self-adapt mode to switch. 8.Afford the state indicator,external power(output 5V~50HZ 1A) 9.Interface:electric port:RJ-45 fiber port:SC 10.Twisted-pair:Cat5 Cat6 11.Singlemode fiber: 8/125,8.3/125, 9/125祄 12.Working temperature:0~50 degree 13.Storage temperature:-20~70 degree 14.Humidity:5%~90%(noncondensing) Specification Connect type: SC Fiber type: Multimode Wavelength: 1310nm Typical distance: 40KM Min TX PWR: -8.0dbm Max TX PWR:0.0dbm Sensitivity:-32.0dbm Link Budget:24.0dbm