LED Auto.Encapsulating Machine This machine is the equipment especially designed to produce LED lamb. It has complete functions; it can be controlled by man or machines in the man-machine panel with simple, convenient operation and stable, reliable function. The aluminum moving direction and any abnormal state can be detected by our device with sound and light warning. With double model bar, the double bracket’s insertion and model bar’s filling can be done simultaneously. High speed and high yield, turnout of one side is more than 10kpcs/h with the maximum of 12kpcs/h. controlled by the walking machine, it can be controlled easily. Its non-defective is high than 98%, therefore it is your best choice. 8 main parts: model-leaving station, glue-filling station, spraying station, bracket-fetching station, glue-staining station, bracket-inserting station, bracket-planishing station, oven station. Use: it can be used in the process of glue-filling and bracket-loading, roasting of LED2-20 lamp Output: over 20000pcs/h, with nondefective rate of more than 98%. Control mode: man or machine interface plus OLC Power demand: voltage of oven AC380v (3 directions and 5 lines) .other voltages AC220v, controlling voltageDC24v, and general power: 40kw Size of fitting parts: aluminum ship: 39mm?5mm? 210mm?20 pieces(w-h-l) aluminum plate:125mm?2mm?57mm?0 pieces(w-h-l) Size of the machine’s cabinet:2630mm?600mm?800mm(of which the length of the oven 7200mm) Color of the cabinet: jasmine baking vanishes Weight: 3000kg Conditions of the operating environment: room temperature about 25℃. Relative humidity60%, the machine’s cupboard should be equipped with voltage-regulator and dry, stable air source. Guarantee: one year under normal operation.