Physical Properties: Appearance： Off-white to pale yellow powder Purity (%): ≥99.0 Melting Point (℃): 165-170 Applications:IHT-IN 510 is used to increase the shelf time of olefinic resins.It may be used in coatings, adhesives, photoresists, printing inks and printing plates as well as unsaturated polyester resins,vinyl monomers and acrylate oligomers.IHT-IN 510 is off-white to pale yellow powder. It is typically dissolved in relevant monomers before usage. As it is typically used at low concentration in formulated systems, the light discolor-ation does not affect performance and should not affect the quality of final products. IHT-IN 510 recommended concentration: 0.01-0.1% IHT-IN 510 recommended applications: UV Curing Inks UV Curing Coatings Photoresists Adhesives Vinyl Monomers Unsaturated Polyester Resins Since your specific applications and conditions of use are beyond IHT抯 control, you must determine the suitability of the product and the suggestions mentioned herein for your specific applications. Storage Conditions:IHT-IN 510 is sensitive to visible light and any exposure to sunlight should be avoided. Kept at low/ambient temperature(below 50℃) and absolute dry conditions. Avoid contacting with alkaline additives and water.The product is stable for 2 years if stored in original, sealed containers under above-mentioned conditions. Safety & Handling:IHT-IN 510 should be handled in accordance with good industrial practice. Detailed information is provided in the Material Safety Data Sheet (MSDS). Packaging: 20Kg carton Product Name:IHT-IN 510