● This machine can fulfill the processes such as paperboard printing (1~5 colors), creasing, edge trimming, slotting, corner cutting, hole punching and die cutting etc in one cycle automatically.。 ● The auxiliary paper feed with vacuum suction push-plate is adopted and the main motor抯 electromagnetic speed regulation is employed. ● The main motor adopts conversion control and is stable in run. ● On the master control panel of the paperboard feeding part there is equipped with a 5.7 inches LCD touchable screen. (Omron，made in Japan). ● PLC and touchable screen control are applied in productive output counting, velocity, intermittent feeding, anilox roller and the up-to-down movement of the rubber roller. ● If paperboard-lacking is found in the automatic return-to-zero or productive process of every unit, this machine has the functions of automatic stopping and trouble alarm. ● The slotting system employs high precision screw bar and knife disc position is arranged accurately and reliably. ● The rubber cushion recovery system and differential compensation device are employed for die cutting rubber roller. ● Zeroing device is installed for every unit. ● The pneumatic lock is actuated in case the electrical control equipment of every unit released. ● The transmission gears accurately ground is lubricated with splashing oiling systems in their running to gain the high performance, low noise and long service life. ● The electric control units and major bearings are used imported ones to secure the top quality.