(1):PTFE rod:
TYPES: Pressed rod: diameter:2-4(mm). Length: produced under requirements;
          Extruded rod: diameter:5-120(mm), length: 500-3000(mm);
         Die pressed rod:diameter:55-300(mm) length:100-300(mm).
MAIN PROPERTIES:
          Tensile strength>14.0Mpa,
          Crack elongation>140%.
          NOTE: when the diameter of rod is larger than 16mm,only test Apparent density.
          APPLICATIONS: Electrical insulation, seal, anti-sticking materials.
(2) PTFE Tubing:
TYPES: Pressed pipe:out diameter:1-25(mm).Wall thickness:0.1-2.5(mm)length: produced under requirements;
          Extruded pipe: outside diameter:25-200(mm),wall thickness:1.5-8(mm) length: produced under requirements;
          Die pressed pipe: outside diameter:25-1200(mm)wall thickness:5-500(mm)length:100-300(mm).
MAIN PROPERTIES:
          Tensile strength>18.0Mpa,
          Crack elongation>230%.
(3) PTFE Molded sheet:  Types:length*width:150*150,250*250,300*300,450*450,600*600,800*800,1000*1000,1200*1200,1000*2000.
MAIN PROPERTIES:
         Tensile strength>15.0Mpa,
         Crack elongation>150%.,
         Dielectric strength>10Kv/mm