Product Features: Power Source: 100~130V/AC 220~240V/AC 100~240V/AC(Bivolt) Power Frequency: 50-60Hz Ambient Light: <5Lux~2000Lux(adjustable) Rated Load: 500W Detection Distance: 6~12m(adjustable) Time Delay: 5Sec.~8Min.(adjustable) Installation Height: 1.8~2.5m Detection Motion Speed: 0.6-1.5m/s Working Humidity: <93%RH IP44 Infrared Inductor Lamp Instruction General: The product is an energy-saving automatic switch adopting integrated circuit and precise detecting components. It can be on when one comes and off automatically after leaves. Its performance is stable. It can identify day and night. The lamp can turn on when one enters detection field and triggers it, it can turn off automatically when one leaves detection field. Function: Can identify day and night automatically, the ambient-light can be adjusted, so it works at night automatically and stops in the daytime. Time-delay can be adjusted varying with the place. Specifications: Detection range:180? 120? Detection distance: 12m (<24℃) Power source: 110 ~130V/AC 220 ~240V/AC Time-delay: min5sec Max7min?min Rated load:150W 500W 1000W Working temperature:-10℃~+40℃ Working humidity: <93%RH Ambient-light: <10Lux~2000Lux Installation height: 2m~4.5m Installation: Avoid installing it near sunshine zones or where air stream and temperature have obvious alteration, connect line according to the right fig. N --?blue L ?brown Out-Red Connect blue and brown with power Connect blue and red with load 1 Please shut off the power before installation. (See following diagram) 2 please tighten off the screw on the rear lid of junction box. 3 Please connect the power into sensor lamp according to connection figure. 4 Please install the sensor lamp on the selected position according to installation diagram. 5 please cover the rear lid and tighten the screw. Then you can test it after electrifying. Test: Sensitivity: Adjust the knob ??clockwise to raise its sensitivity and anti-clockwise to reduce its sensitivity. Adjust the knob??clockwise to last operating time and anti-clockwise to shorten it . Light control: Adjust the knob?攖o selectdiffer