Product Features:
Power Source: 190V/AC~240V/AC 50Hz~60Hz
100V/AC~130V/AC 50Hz~60Hz
Ambient Light: 2~1000lx(SWITCH)
Rated Load: 40W
Detection Distance: ≥6m (adjustable DIP switch)
Detection Aange: 120?360癟)
Time Delay: 5~480Sec(SWITCH)
Ballast Model: Electronics
Light Stick: Circular
ST87 Ceiling PIR Lamp
Instruction
SUMMARY
This product is an energy automatic ceiling PIR lamp, it can identify day and night. It adopts infrared detector, IC and SMD technology, when someone enter its detecting range, the infrared detector turn on the lamp, after he leave its range, the lamp will turn off automatically.
EATURES
Working light is adjustable: when turn LUX knob to sun, it can work in any light , when turn it to moon, it can work only in the light below 20lux;
Working time-delay is adjustable: when turn TIME knob to min, the working time-delay of the lamp is 5sec~15sec, when turn it to max, the time-delay is 5min~9min.
TECHNICAL INDEX
sense range:angle 360?#65292;7m.max(diameter)
Power supply: 180~240V/AC□
110~130V/AC□
Rated load:40W□32W□
working temperature:?0℃~ +40℃
working humidity:≤93%RH
Time-delay:min: 10sec+5sec,
max: 7Min+2min
Working light: <20LUX~2000LUX
INSTALLING
Take downthe decorating ring and lens by turning anti-clockwise them, like the right diagram-1;
According to the right diagram-2 loosen those lock-buttons on base and take off the lamp cover;
Connection-wire: Connect L(brown) and N(blue) with power;
Install the base on the needed position;
Close the lamp cover, and button up the lock-buttons on base, and then turn clockwise the decorating ring and lens.
SENSE RANGE FIGURE
TEST
?Take downthe decorating ring and lens by turning anti-clockwise them;
?turn LUX knob clockwise to end(sun) and turn TIME knob anti-clockwise to end(min);
?Switch on power, the lamp turn on. After the lamp turn off, the sensor enter stable working state;
稴ense it once, the lamp turn on, and after about 10sec it turn off automatically;
稩f turn LUX knob anti-clockwise to end(moon), test it in the daytime, sense it, the lamp will not be on, cover the sensitization resistor with opaque object, sense it once a