Model:GD-VT2.1

Voltage: 12v DC  DC10-15V

Support: Support any GD coin acceptor and Bill Acceptor as long as it can output pulse signal

Apply to: vending machine, wash machine, game machine, shoe cleaning machine, TV, Massage chair, petrol filling station , automatic battery recharge, PC, etc.

Function: timing control, time delay, voltage detect, time add (cumulation ) function such as 1+2+5=8 ,pulse trigger time board.

Time range: LED show 1-999 minutes, 1-999 seconds,

Voltage detect: LED show 0-99.9V  or 0-9.99V

The mode display: P-1 should be selected in common.

P-1 Timing relay mode

P-2 Time delay relay mode

P-3 Voltage control relay mode

P-4 Voltage & time control relay mode

 

 

Set Time

1. short press SET into P-1[timing control mode],

2. press ENTER,LED shows 000. 

(T1=000,Operating time,T2=000,Releasing time)

3. short press SET, 000, 0 twinkles, into T1.

Press ENTER to program operation time 1-999 sec or

Minutes, decimal point twinkle=minutes, without it=second

4. short press SET 4 times into T2, ENTER to set.

5. short press SET to set circulation times.

6. short press SET to exit set status, and into operation.

 

Relay parameters for engineer reference:

Coil input : DC 12V/5V

conversion :(normally open normally closed)

Contact load: 10A/277VAC

Contact resistance: ≤ 100mΩ (1A 6VDC)

Mechanical durability: 10 million electricity

Durability:> 100,000 (10A-250VAC)

Operating Temperature: -40 ~ 85 ℃

Under Time relay mode, can set the rely 

respectively to control Relay operating time or 

release time  

can loop execution or single execution