PHPA is high molecular weight polymer with a moderate anionic charge for drilling mud additive. It is can be used in both industrial and oil field drilling application and it is usable in both fresh water and brines. It can be used in high temperature.

Application

☆ Shale stabilization

☆ Viscosifier

☆ Friction reduction

☆ Fluid loss control

☆ Lubrication

Specifications

Appearance: off white powder

Degree of charge, %: 25-35

Molecular weight, million: 5-16

Solid content, %: 90 min

 

Polymer Mixing

To obtain homogeneous solution, efficient dispersion is necessary. The most convenient method of dispersing these products is with a polymer eductor or a commercially available dry powder feeder unit. Solution should be made up at 0.1-0.3% solid. Make-up water temperature should be between 10℃ and 40℃ for optimum product performance.

Following dispersion into agitated water, stirring should continue for about an hour to ensure complete dissolution. Stirring maybe carried out by propeller type stirrer with a speed of 200-500 rpm.

It is recommended to have both a stock make-up tank and a solution holding tank for dosage into the system.

The above recommended anionic solution concentration are stable for up to one week.

Aluminum, zinc, copper, or iron should be avoided in make-up system.

Shipping, Handling and storage

PHPA is packed in 25kg Kraft paper bag with inner plastic bag.

Store in cool room.

Do not contact air directly for long time, the product can absorb damp to become agglomeration and difficult for dissolving.

The shelf life is two years

 

PHPA is not dangerous chemicals, please read MSDS for detailed information.

The product will be very slippy on ground after contacting water, any spill of product should be cleaned without water completely.