FUSED MULLITE AND SPINEL Fused Mullite is produced by the electric furnace fusion of Bayer process alumina and high purity silica. The result is a needle-like alumina-silica grain that has low conductivity, excellent thermal shock resistance, and excellent resistance to deformation under load. Fused Mullite is used in applications such as refractories for glass and steel industries, as kiln furniture, in investment casting as shell building materials, in spark plug bodies, and many other applications. Fused mullite main parameter properties elct.melt.3Al2O3.2SiO2 Chemical Composition Al2O3 70-77 SiO2 22-29 Fe2O3 less than 0.10 R2O less than 0.5 RO less than 0.3 Refractoriness over than 1850 (g/cm3)Particle bulk density over than3.03 Linear expansion coefficient -6.0*10-6/ Glass phase content(%) 5-6% 3Al2O3.2SiO2 Phase 94-95% Fused Spinel is produced by the electric furnace fusion of alumina (Al2O3) and magnesium oxide (MgO) at temperatures in excess of 2200癈. Depending on the desired properties of the spinel, this material can be produced with varying degrees of MgO from alumina-rich to magnesia-rich. These spinels are excellent refractory materials that show high resistance to attack by slags and glass. Spinel property of index properties AM-70 AM-90 Chemical Composition(%) Al2O3 69-76 88-91 MgO 22-27 8-9 CaO 0.65 0.4 SiO2 0.3 0.25 Fe2O3 0.5 0.5 Grain size(mm) 3~5 3~5 1~3 1~3 0~1 0~1 Fine powder(mesh) 80,100,240,320,etc 80,100,240,320,etc Micro powder(祄) 3~5,5~10 3~5,5~10