Ceramic heat-resistant ring of wear silk is used, therefore the product of 0.5 to 1.5 times higher than conventional power. Fever body to allow imports of wire into a spring-like penetration of the circle, ceramic, stainless steel jacket used in Japan, the Middle cotton high temperature thermal insulation (aluminum fiberboard) temperature to prevent leakage. Ceramic is a high frequency ceramics, heat transfer is fast and hard non-friable, high temperature deformation characteristics of aging is not easy. Product main characteristic 1. Transfers heat quickly, gives off heat evenly, the work is stable. 2. Temperature nothing more than releases, may save the electrical energy, the shell touches the security with the hand. 3. Product power is high, uses the ceramic strip ordinary to put on the silk way power ratio to want high 0.5~1.5 to double . 4, European and American thermostable filament, has radiates quickly, gives off heat evenly, the high temperature steadily grades the characteristic, but long time in 600 - 800 ℃ uses. 5. Product life long, because the raw material gets older quite slowly under the high temperature therefore the product life is long. 6. Conforms to the national GB each specification. Power deviation +5% ∽ - 10%. 7.Electric strength: After the voltage 1500v/50Hz sine alternating current pressure test, not penetrates the phenomenon after 1MIN.--------------------------------- Jiangsu Baoying Jinzhou Glass Electrics Factory Add:No.47Taoyuan Two Village Baoying County,Jiangsu,China Tel:+86-514-8178299 / 8102538 Fax:+86-514-8231859 Contact person:Zhiyuan Zhou P.C:225800