380E Automatic Medical Film Processor Characteristic: a.Full new appearance,beautiful and elegant,occupy small area; b.Overall machine adopts Sanyo electric machine in connection with incline gear face decelerator drive,running calm,noise is extremely small; c.Deep slot U shape bird leading type convey construction,film after multi-layer extrusion has higher image quality. d.Full mould fabrication, characteristic stablised; e.High automatization,ready to feed film right after switch on; f.After feeding the film,automatic equipment starts the following components: 1)Drive electrode 2)Fans 3)Electricity heater 4)Medicine fluid supplying system In 3 minutes after the last film comes out,all the above-mentioned components will stop working automatically saving energy.The only unchanged thing is the developing temperature. Application: X-ray film developing,MRI,CT,DSA,laser printing reflect arranging. Parameter: 1.Application:x ray,CT,MRI,DSA,laser pinting soft film fast developing 2.Film treatment specification:Film minimum length:4"(100mm) film maximum width 14" x 17" film narrowest:10mm 3.Film developping capacity:60pcs/hour(12" x 15") 4.Film developping velocity:dry in and dry out 120s-360s no grade adjustable 5.Film developping medicine liquid temperature control scope:20C-40C adjustable 6.Drying temperature:55C+5C environment temperature:5C-30C relative humidity:85% 7.Noise:<50db power supply:220v/50hz power:maximum 1.4kw 8.Medicine liquid slot volume:develop slot,flexation slot,bath slot all are 4.6L 9.Water consumption volume:≤1.5L/minute 10.Machine body volume:810 x 560 x 520(length x width x height)Machine frame excluded 11.Package size for export:740 x 660 x 1200 gross weight:46kg