.Notices 1.For the first time,please connect the reader to the USB port,then choose the driver on CD accordingly. 2.Connect the reader to the computer after it has been turned on. 3.While the reader is in reading porcess(unload or download the data),the LED gleams quickly,do not switch off,do not insert or pull out the card,do not connect or disconnect the reader to the computer. 4.Pleae keep it in the dry environment while it is not in using for a long time. Ⅱ.Product functions 1.The USB multi-function reader supports 12 kinds of memory Cards:XD,MD,CF,Min SD,SD,MS,MSPro,MSDUO,PDUO,SM and MMC,RSMMC(The model 6 in 1 supoorts MD,CF,SD,MS,SM and MMC)Others specification please refer to the marks on the box. 2.Support USB1.1 2.0 connector,Easy to install and use,Plug and paly. 3.Connect the reader with computer via USB connector directly,no need other power suppoly. 4.The LED will be lighted when you connect the reader to the computer or insert any cards which are supported by the reader. 5.Support Windows 98/SE/ME/2000/XP,MAC 8.6/9.0/10.0 or above.Windows XP/ME and MAC 10.0 or above versions do not need to install the driver. Ⅲ.Package contents 1.Driver CD 2.USB extension line. 3.Leather Pouch 4.User's guide and guarantee card Ⅳ.Software/hardware installation 1.For Apple user,MAC 10.0 version or above,for PC user,Windows 2000/ME/XP,are no need to install the driver. 2.For the user of Windows 95/98/98SE system,you should insert the CD into CD-ROM and then choose the Windows/Setup.exe in the CD.Install the driver following the guide. 3.If you are the Apple user,please install the driver by choosing the MAC folder. Ⅴ.Unit specification 1.Power consumption:Less than 100mA(It will be higer when MD is running) 2.Size(L譝譎）：101mm?8mm?5mm 3.Weight:75 grams(excluding the wire and medium cards) 4.Reading/Writing speed:USB 1.1 12 MB/S USB 2.0 480 MB/S