OnAccess1001 PCI Bus optical Ethernet adapter is designed to operate at 100Mbps
and provide a network throughput of 200Mbps in full-duplex mode. It offers a range
of options, such as fiber / connector type and operating wavelength / distance,
to meet the requirement of various applications.
Features:
1) Plug and play installation
2) Complies with the IEEE 802.3u 100Base-FX / IEEE 802.3ah 100Base-LX10 /
-BX10 Ethernet standard
3) Standard optical fiber connector and cable type options
4) Full duplex or half-duplex operation
5) PCI bus master direct memory access for high throughput and low CPU utilization
6) IEEE 802.3x flow control enabled with full duplex operation, allowing enhanced
operation when directly connected to a switch
7) IEEE 802.1Q/VLAN tagging supported
8) VLAN registration using IEEE802.1Q GVRP standard
9) IEEE 802.1p tagging supported
10) IP Multicast packet filtering reduces CPU utilization and conserves network
bandwidth
11) Large 2KB Tx, 2KB Rx FIFO buffers synchronize transmissions and buffer data
to help prevent packet loss
12) Two LED indicators: Link/RxAct, Power/TxAct
13) Drivers for all leading network operating systems
Software drivers:
1) Microsoft Windows 95, 98, 98 SE
2) Microsoft Windows 2000
3) Microsoft Windows XP
4) Microsoft NT 3.51 / 4.0
5) Microsoft Windows for Workgroups 3.11
6) Microsoft Windows CE. NET 4.0 / 4.2
7) Microsoft Client for DOS
8) NDIS 2 driver
9) NDIS 3 driver
10) NDIS 4 driver
11) NDIS 5 driver
12) Novell NetWare Client for DOS
13) Novell NetWare Client 32 for DOS
14) Novell NetWare Server 3.12, 3.2, 4.11, 4.2, 5.0, 5.1
15) ODI for DOS driver
16) 32 bit ODI LAN driver
17) NCSA
18) FTP PC / TCP
19) SCO Open Server 5.0.x
20) RPL Boot ROM
21) PXE Boot ROM
22) DMI Driver
Specifications:
1) Optical interface: optical Ethernet 100Base-FX
a) Single single-mode fiber, single wavelength 1,310nm, single SC / PC connector,
operating distance 15km
b) Single single-mode fiber, dual wavelength 1,310 / 1,550nm, single SC / PC
connector, operating distance 40km
c) Dual single-mode fiber, single wavelength 1310nm or 1,550nm, dual SC / PC
connectors, operating distance 60km
d) Dual multimode fib
