Self-Propelled Sitting Thermaplastic Road-Marking Machine 1. Engine: The 31 kw water-cooled electric startup diesel engine with four-cylinder inline, low noise and environment protection has indication of water temperature, voltage and motor oil, whose max rotated speed is 3000r/min. 2. Driving system: The originalimported variable speed transmission system (HTS)with automatic brake device flexible operated in forward, back off or stop. 3. Driving speed: Forward: 0-22km/m; back off: 0-12km/h; Max climbing capacity: 15? 4. Heating: Heat transfer oil ensure the heating more safety and friendly to the environment.5. Marking bucket: There are hydraulic control variable heat presavation marking bucket installed respectively in the two sides, which enable to mark double solid lines or single lines. The structure board adopts imported high temperature resistance (2000℃) and oxidation resistance hold size special steel board, which have more stability after punching. The fundus used tailor-made alloy steel pneumatically actuated structure. The floor knife use tung alloy bit. The exact craftwork ensures better sensing ability, abrasionproof and firmness. And the convex shape will be more regular, the edge of bottom line more straight, the head more perfect. The configuration standard of bucket is 150mm. 6. Chassis: Firm welding frame, four-wheel structure, as well as the gas-filled poressure wheels There is a seat for the operator, and the driver can freely control the directions by the steering-wheels; The stable brake system makes the running more safety. 7. Paint tank: Paint tank made of cold-rolling oxidation resistant steel,whose heating temperature can be freely controlled according to the different kinds of coating chosen by the owners, equips with erect type hand stirrer device, cubage: 450kg. 8. Transportation: Optional for the tilt-trailer device. 9. Shape size. The whole machine weight: 3700mm (length)*1600mm (width)*1800mm( height). 2100kg(not including the gas tank, with a 150mm bucket).