Features:
*Air cleaner: under hood
* Cylinder: Alloy cast iron
* Cylinder head: HT250 alloy cast iron with copper and chromium
* Crankshaft: QT800-3 modular cast iron
* Crankshaft drive: by crankshaft through bevel wheel at blower end
* Crankshaft case: HT250 grey cast iron
* Pistons: ZL109 aluminum alloy
* Injection pump: right spiral
* Governor: mechanical centrifugal
* Cooling system: forced water cooling
* Lubrication: oil pressure and splash lubrication
Overall Dimension Diagram:
* Wheel base: 1300 mm / front , 1300-1600mm / rear
* Overall length: 3825 mm
* Overall width (min.): 1625 mm
* Height over exhaust: 2065 mm
* Height over safety frame: 2507 mm
Engine Full Load Performance:
* Model: SL3105ABT
* Type: 3-cylinder vertical, water cooled, 4-stroke, nozzle combustion chamber
* Bore/Stroke: 105/117 mm
* Displacement: 3.039L
* Compression: 17:1
* Rotations: Counterclockwise (view toward flywheel)
Power Take-Off:
* Type: semi-independent dual speed (either two of 540 r/min, 720 r/min, 1000r/min)
* Configuration: 35mm/6 spline, 38mm/8 spline
* Speed/@engine rpm: PTO 540/1994 rpm, PTO 1000/2050 rpm
Steering/Brakes:
* Steering type: hydraulic
* Service brakes: disc type
Fluid Capacities (filling):
* Fuel: 47L
* Engine oil sump: 10.5L
* Front drive axle: 7L
* Cooling water: 12.5L
Electrical:
* Alternator: JFB1, 350W, 14V
* Starter: QD142, 2.5KW, 12V
* Battery: 3-Q(A) 150, 12V
* Lights: 2 head light, 2 signal light, 1 tail lamp
Clutch:
* Type: dual stage, gear operation
* Size: 10"Transmission
* Type: 4 x (2+1) x 2 compound type
* Fwd/Rev. speed: 16F/4R
* Gears: 2 x 2
* Ranges: 4
* Options: Yes
* Synchronization: optional
* Speed range: 0.321-30.203 km/hr / 0.476-9.979 km/hr
Performance:
* Maximum PTO horse power measure at 2350 rpm: 40.5
HP Hydraulics:
* Type: closed center
* Flow/Pressure: 16MPA
* Type of pump: CBN-E314 gear pump
* Max. flow at remove valves: 18dm3
* Number of remove valves: 1
* Type of remove valves: safety valve
3-Point:
* Category: 2
* Aux. lift cyl: std.
* Lift cap @ hitch pt: 7500N (at 610mm behind lift point)
* Controls: position
Chassis Data:
* Pendulum angle of front axle: 12 degrees
* Tires: front wheel 8.50-20, rear wheel 12.4-28
* Tire inflation pr