Compound High-Intensity Wall Material Summarize Compound high-intensity composite wall material is a new type of energy-saving product. The most salient characteristic to distinguish it from other wall materials are high intensity, light weight, installing easily and quickly, durability, and substantial savings of time and cost. It could be built as standard size, and you could also choose exclusive shape to meet project requirements. It could be widely used in buildings, plants, cold stores and other mobile houses. It is a perfect construction material. Sections are made from two materials-EPS(expanded polystyrene) coated fiberglass reinforced mesh as the insulating wall core,and integrated galvanized steel construction studs for strength.The surface of the sections can have stucco,wall covering tiles or coating applied directly on site,or at the factory,Flame resistant EPS core have such characteristics of light weight,heat insulation and wound insulation,if could be grooved for wire and pipe. Integrated galvanized steel studs give the system enough strength,and ensure structure could be assembled easily and quickly to save your time and cost. Characteristics * Weather resistance EPS covered with fiberglass alkali-resistant mesh and special stucco, make our products wear well and can resist the affect of rain, snow, wind or other bad weather. * Heat insulation The core of our composite wall material is EPS. It has the ability of self heat insulation, It is really ideal material for construction in both tropical and frigid countries, it will bring you a comfortable habitation. The building which used our materials is airtight and vapor transmission is very low. That is more excellent than traditional wood and bricks. It also achieve the hygiene requirements when Used in cold store construction. * High supporting capability The integrated galvanized antirust steel construction studs for strength is prepared in the wall, our wall panels have enough supporting capability. We can use different stud gauge or spacing to meet your project requirements. * Installing easily and quickly In the reasonable span you only need to use L-shaped brackets or angle iron to connect with floor and roof system.