Nema 23 Stepper Motor and HSS 57 Hybrid Servo Driver 57HSE2N-D25 Nema 23 Closed-loop 2N.m Stepper Motor
Description:
HSS57 is a two-phase hybrid stepper motor servo driver, adopting new 32-bit Digital Signal Processing
control technology and closed-loop control technology that can prevent loss of movement synchronization and ensures accuracy.High-speed torque attenuation is far lower than the traditional open-loop driver, which can greatly increase high - speed performance and torque of stepper motor.Load-based current control technology can effectively reduce temperature rise of motor and prolong motor service life.Built-in position and alarm output signal is convenient for PC monitoring and controlling. Position out-of-tolerance alarm function ensures machining equipment safe operation.The driver is a great replacement for traditional open loop stepping driver and can replace part of traditional AC servo system.
Features:
The driver uses advanced 32-bit special motor control Digital Signal Processing
chip and vector closed-loop control technology.
Stepping closed-loop circuit system, no loss of movement synchronization.
Improve motor output torque and speed.
Current is adjusted depending on the load, reducing motor temperature rise.
Fit for all kinds of machinery load conditions (including low rigidity belt wheel and pulley) without adjusting the gain parameters.
Motor runs smoothly, vibrates mildly, and improves acceleration deceleration dynamic performance.
Zero speed static ability of no vibration after completion of positioning.
Impulse response frequency is up to 200kHz.
Maximum 51200 steps/rotation 16 kinds of optional segment.
It supports over current protection, over voltage protection, position out-of-tolerance protection.
Motor has torque 2N.m, rated current 4A, shaft 8mm, maximum speed 2000rpm and rated speed 1000rpm.
Specifications:
Power Supply
DC24~50V
Output Current
Peak 6.0A(changes according to load)
Logic Input Current
7~20mA
Pulse Frequency
0~200kHz
Suitable Motor
57HSE
Encoder Wire
1000
Insulation Resistance
>=500M& ;
Cooling Method
Natural cooling or using external heat sink
Working Condition
Environment
Avoid dust, oil mist and corrosive
Temperature
0~50°
Humidity
40-90%RH
Vibration
5.9m/s2Ma
x
Storage Temperature
0~50°
Package Includes:
1 x Hybrid Servo Driver
1 x Stepper Motor
1 x Cable
0
