We are an Australian company which deals with Natural Gum Rubber (latex), our manufacturing plant is based in Malaysia. We have now diverse into other types of rubber as well as becoming a leader in Recycling rubber waste. SR-138 is our high-grade gum recycled from the rejected examination gloves. We are currently exporting to US, Australia, Vietnam, Philippines, NZ. Please do not mistake this as tires reclaim rubber, which is of lower physical properties and black in color. The process used in producing this grade is by using the application of mechanical shear breakdown with non-staining Oils and Chemicals. No fillers are added when producing this grade. Our process of recycling is a new de-polymerization process and environmental friendly. Our process drastically reduces the chance of damaging the physical properties of the natural rubber, which the conventional process cannot do. We are the only factories that produces recycle rubber that is milky white, which is very suitable for replacement against SMR L and color rubber products manufacturer. The result is we have a High Grade Recycle Rubber which has a rubber content of almost 90%, a low specific gravity of about 0.95 and very high physical properties. Products cost are a major consideration; a large quantity of SR-138 can be used by substituting with the virgin polymer thereby resulting in the cost reduction. With the use of SR-138 the high physical properties and improved process ability are achieved. The manufacturing of products such as adhesives, tapes and sponge rubber, a long time is required to masticate the virgin polymer breakdown. Using SR-138 this process of pre-mastication can be eliminated. This advantage also reduces the processing cost by saving electrical energy and time. As the specific gravity is also low, the cost per kilo is also reduced.

The followings are the grades & FOB Price "Port Klang/ Malaysia":
1. SR 138 White (Gloves)- NR latex exam glove only
2. SR 138 Premium White - NR latex materials only -
5. SR 138 LG Light Red - NR latex materials only
9. ISRW 138 White (Polyisoprene Rubber)

Advantages
Process: SR-138 requires no mastication, faster and smoother mixing is achieved. Reduces the requirement of energy thus the heat produced.
Molding Process: Flows better in the mould, Clear design impressions are obtained from intricate designs, reduces the entrapment of air and low rejection rate is achieved.
Extrusion Process: Faster extrusion rate is obtained with reduced swelling.
Vulcanizing Process: Faster cure rates are obtained with no risk of reversion.

SR-138 is highly recommended to all rubber product manufacturers: - car / bath mat, rubber toys, rethreading tire, rubber grommet, general molded rubber products, shoe soles, castor wheel, adhesives, tapes, sponge rubber etc.

Thank you for taking the time to read this mail and we hope to hear from you soon. Please indicate interest so that we can organize sample and a price to you. We can be contacted at  or